Optimize

Protecall’s HVAC Optimization reduces the impact of the environment on HVAC operation resulting in energy savings.

 

Protecall’s dual coating HVAC Optimization package can increase efficiency and restore capacity to rooftop equipment, saving 15-25% on energy bills.

Protecall's energy coatings reduce the surface temperature of applied surfaces to within 5-8 degrees of ambient.  This can be a reduction of 10-40 degrees, resulting in equipment cycling less frequently and cooler air being delivered to the occupied space.  Energy reduction from 8 to 18% has been measured.

The patented blend of ceramic compounds reject up to 95% of surface heat load from being absorbed.  Cooler surface temperatures reduce operational demands.

Coils coated with our specified products have demonstrated reduced energy consumption by returning performance back towards original design specifications.

In addition, HVAC Systems typically consume the majority of a buildings total energy usage. Because of tight building envelopes outside air has to be introduced per building code (ASHRAE 62) to  provide acceptable air quality. Our tested systems may allow for reduction of outside air requirements.

Project in Mind? Use our Optimization Calculator for Budgeting & ROI. Then Contact Us for in depth solution details, case studies and other cost saving benefits

Unknown-4.jpeg

HVAC Optimization Package Coatings

  • Proven 15-25% Energy Conservation on Existing Rooftop Equipment

  • Combination of Superior Thermal Barrier to Cabinet and Ductwork along with Condenser Coil Restoration and Protection

  • 3-6 Degree Cooler Air Delivery for Lower Energy Cost

  • Restore capacity of equipment to intended design

homedepot1.jpg

Optimization & Restoration of Existing Coils

  • Optimize Performance & Restore Capacity of Cooling and Condenser Coils

  • Coil coating applied to prevent further degradation and efficiency loss

  • Finished coil surfaces incapable of mold and microbiological growth

  • Improve laminar air flow & increase heat transfer capability

  • Measured to provide 8-15% increased efficiency

boiler00.jpg

Pipe, Boiler and Tank Insulation Coatings

  • Reduce heat & energy loss up to 70%

  • Prevent corrosion under insulation (CUI)

  • Spray applied, monolithic, encapsulated ceramic thermal barrier

  • Direct installation to operating steam, condensate and hot water lines without requiring any shutdown

  • More effective at fraction of thickness compared to fiberglass insulation