Rust, corrosion, and deterioration are some of the most costly issues that face engineers, facility managers, and owners.
It is rare to find encapsulating systems with proven testing to sustain corrosive environments for:
Rust
Lead-Based Paint
Asbestos
Bio-Hazardous Materials
Rust Grip® is a one-coat, patented encapsulation system – interior and exterior – that is the one surface protection coating that also acts as a full containment covering. This moisture-cured polyurethane coating has been successful in the harshest environments: chemical fields, oil fields, oil rigs, and in areas that demand resistance to the corrosive effects of day to day exposure.
Rust Grip® can protect and seal surfaces of steel, aluminum, concrete, wood, fiberglass, and other substrates. Rust Grip® will seal out moisture and air with a permanent membrane that stops penetration and deterioration, blocking chemical pollutants that cause corrosion and deterioration.
Click here to watch the Rust Grip®Application Video
Requires only 1500 to 3500 psi power wash to clean and prepare surface; no white metal or near white metal blast is required
Can be applied over flash or surface rust without loss of adhesion or reduced performance; can be applied over existing paint (non-glossy, solidly bonded)
Can be re-applied or touched up with minimal surface preparation
Has been applied directly over rusted surface and after 3 years, pull test of 580psi compared to 100 psi before coating
Moisture Membrane
Permanent, protective membrane that stops water penetration over metal, masonry, and wood surfaces (not for total immersion). Passed ASTM testing for Water-Barrier and Wind Driven Rain Testing.
Prevents surface deterioration, contamination, and resists the formation of mold and mildew.